Common size on stock, Special sizes needs new production.Can cut to Size, cut to Shape.
EMERSONMETAL
| Quantity: | |
|---|---|
We can supply all types shipbuilding steel plate in different sizes, thin thickness to thick heavy thickness, can cut to size, cut to length, different types sheet metal fabrication, DIN17100 ST44-3 ST52-3 ST50-2 ST60-2 ST70-2 Low Alloy Steel Plate, Low alloy steel plate, steel plate, DIN17100 LOW ALLOY steel plate, ST44 low alloy steel plate, st52 low alloy steel plate, ST60 low alloy steel plate, ST70 low alloy steel plate, st44-3 low alloy steel plate, st52-3 low alloy steel plate, st50-2 steel plate.
Sheet Metal Fabrication Service:
Steel plate cut to size cut to length: 1 pc order is ok.
Steel Plate Laser Cutting: can cut thickness upto 80mm, cut by all drawings and customized sizes.
Steel Plate Flame Cutting: can cut thickness uptp 400mm.
Steel Plate Watejet Cutting: can cut thickness upto 200mm
Steel Sheet Bending: Bending all shapes.
Steel plate Welding: Customized welding.
CNC machining: Customized CNC machining.
The grades, materials, dimensions can be supplied for Low Alloy Steel Plate.
The production standard and production grades and materials , and thickness can be produced, the delivery condition is as below, the production thickness when the technical property is assured, the production thickness when the UT TEST is assured, the production thickness when the chemical composition grade is assured, all are shown in the below list:
CATEGORY | STANDARD | GRADES AND MATERIALS | TECHNICAL PROPERTY IS ASSURED THICKNESS | UT TEST THICKNESS | CHEMICAL COMPOSITION IS ASSURED THICKNESS | DELIVERY CONDITION |
LOW ALLOY STEEL PLATE | GT/T1591 | 12Mn,15MnVN,16Mn,15MnV 14MnNb、Q295A/B、Q345A、Q345B Q345C、Q345D、Q345E、Q390A Q390B、Q390C、Q390D、Q390E Q420A、Q420B、Q420C、Q420D Q420E、Q460C、Q460D、Q460E | 10～500 | 10～450 | 10～750 | AR、CR、TMCP、N |
JIS G3101 | SS490、SS520、SS570 | 10～500 | 10～450 | 10～750 | AR、CR、TMCP、N | |
JIS G3106 | SM490A、SM490B、SM490C SM490YA、SM490YB SM520B、SM520C、SM570 | 10～500 | 10～450 | 10～750 | AR、CR、TMCP、N | |
EN10025 | S355JR、S355J0、S355J2 S355J2G3、S355J2G4、S355K2G3 S355K2G4、S355N、S355NL S420N、S420NL、S460N、S460NL | 10～500 | 10～450 | 10～750 | AR、CR、TMCP、N | |
DIN17100 | St44-3、St52-3、St50-2、St60-2、St70-2 | 10～500 | 10～450 | 10～750 | AR、CR、TMCP、N | |
DIN17102 | StE315、StE355、StE380 StE420、StE460 | 10～500 | 10～450 | 10～750 | AR、CR、TMCP、N | |
ASTM A572 | A572Gr42、A572Gr50 A572Gr60、A572Gr65 | 10～500 | 10～450 | 10～750 | AR、CR、TMCP、N | |
ASTM A633 | A633GrA、A633GrB A633GrC、A633GrD、A633GrE | 10～300 | 10～450 | 10～750 | AR、CR、TMCP、N | |
Production Dimension: Thickness: 10mm-750mm, width 1500mm-3700mm, length 3000mm-18000mm, the special sizes over this dimension can be produced by customization. Delivery Condition: when assuring the steel plate technical property, the steel plate can be delivered at hot rolled, controlled rolled, normalized, annealled, tempered, normalized and tempered, Q+T these delivery conditions. For the grades not shown in the material list, can send to the technical department for checking for production. | ||||||
DIN17100 ST44-3 ST52-3 ST50-2 ST60-2 ST70-2 Chemical Composition and Technical Property is as below:
Standard | C % max | Si max | Mn max | P max | S max | Cr max | Ni Max | Cu Max | tensile strength（MPa） | yield strength（MPa） | Elongation% |
ST44-3 | 0.21 | 0.17-0.37 | 0.9 | 0.025 | 0.015 | 0.25 | 0.3 | 0.25 | ≥648 | ≥365 | ≥24 |
ST52-3 | 0.2 | 0.55 | 1.6 | 0.04 | 0.04 | - | - | - | ≥470 | ≥315 | ≥20 |
ST50-2 | 0.045 | 0.045 | 1.7 | 0.05 | 0.05 | 0.045 | 0.045 | - | ≥165 | ≥965 | ≥23 |
ST60-2 | 0.045 | 0.045 | 1.7 | 0.05 | 0.05 | 0.045 | 0.045 | - | ≥967 | ≥616 | ≥34 |
ST70-2 | 0.045 | 0.045 | 1.7 | 0.05 | 0.05 | 0.045 | 0.045 | - | ≥882 | ≥129 | ≥33 |
DIN 17100 is a series of German standards specifying steels for general structural use which are suitable for welded, riveted and bolted structural components. They are not suitable for heat treatment, except for stress relieving heat treatment and normalisation.
The following are the areas of application of DIN 17100:
Building Structures: DIN 17100 steel is suitable for building structures, such as high-rise buildings, bridges, tunnels, etc., for improving the load-bearing capacity and durability of structures.
Industrial fabrication: These steels are used for the fabrication of a wide range of industrial equipment and structures, including pressure vessels, storage tanks, boilers, etc. They are delivered in the hot rolled or normalised condition.
Oil and gas industry: for oil and gas pipelines, drilling equipment, etc. These components need to withstand high pressures and corrosive environments.
Power engineering: for power towers, transformers and other power facilities to ensure the stability and safety of the power system.
Agricultural Machinery: For the manufacture of agricultural machinery, such as tractors, harvesters, etc. These devices need to work under harsh conditions, requiring materials with high strength and wear resistance.
Welded Structures: These steels are suitable for welded structures, including steel bridges, building frames, etc., as they have good welding properties.
Cold- and hot-formed components: Suitable for cold- and hot-forming processes, they are used to manufacture structural components of various shapes and sizes.
